What is a receiver?

Nobø HUB sends radio signals to RECEIVERS that can be placed in heaters, power outlets or fuse boxes around your home. Each receiver has a unique ID code enabling Nobø HUB to send signals to the correct unit.

Nobø HUB is compatible with all NOBØ Orion700 receivers and NOBØ NCU receivers, but not with NOBØ Orion512 receivers.

 

 

 

List of receivers

NTB-2R is a combined floor and room thermostat and power regulator for in-box mounting. COMFORT and ECO temperatures are set either on the receiver (thermostat), or with the NOBØ Energy Control APP Interface.

NCU-1R is a receiver for Nobø heaters NF and NT, controllable by Nobø HUB. COMFORT temperature setting is on the receiver (heater). ECO temperature is set with the NOBØ Energy Control APP interface.

 

NCU-2R is a receiver for Nobø heaters NF and NT, controllable by Nobø HUB. COMFORT and ECO temperatures are set either on the receiver (heater), or with the NOBØ Energy Control APP interface.

 

NCU-ER is a receiver for Nobø heaters NF and NT, controllable by Nobø HUB. COMFORT and ECO temperatures are set with the NOBØ Energy Control APP interface.

 

DCU-1R  is a receiver for Dimplex heaters DF and DT, controllable by Nobø HUB. COMFORT temperature setting is on the receiver (heater). ECO temperature is set with the NOBØ Energy Control APP Interface.

 

DCU-2R is a receiver for Dimplex heaters DF and DT, controllable by Nobø HUB. COMFORT and ECO temperatures are set either on the receiver (heater), or with the NOBØ Energy Control APP Interface.

 

DCU-ER  is a receiver for Dimplex heaters DF and DT, controllable by Nobø HUB. COMFORT and ECO temperatures are set with the NOBØ Energy Control APP Interface.

 

 

R80 RDC 700 is a receiver for Nobø heaters C2/C4, B4, T4, P4/P6 and R3/R5, controllable by Nobø HUB. COMFORT and ECO temperatures settings are on the receiver (heater).

 

R80 RXC 700 is a receiver for Nobø heaters C2/C4, B4, T4, P4/P6 and R3/R5, controllable by Nobø HUB. This receiver has no local controls. COMFORT and ECO temperatures are set with the Nobø Energy Control APP interface. 

 

R80 RSC 700 is a receiver for Nobø heaters C2/C4, B4, T4, P4/P6 and R3/R5, controllable by Nobø HUB. COMFORT temperature setting is on the receiver (heater). ECO temperature is set with the NOBØ Energy Control APP interface.

 

R80 TXF 700 is a receiver for Nobø heaters C2/C4, B4, T4, P4/P6 and R3/R5. R80 TXF 700 can be controlled by Nobø HUB via a room thermostat (TCU 700 or TXB 700). COMFORT and ECO temperatures are then set on the room thermostat.

R80 TXF 700 can also be controlled directly by Nobø HUB, if there is a Nobø Switch temperature sensor in the same zone. COMFORT and ECO temperatures are then set in the APP interface.

 

2NC9 700 is a receiver for Dimplex and ewt heaters 2NC8, 2NW5 and 2NW6. COMFORT temperature setting is on the heater, while ECO temperature is set in Nobø Energy Control APP interface.

 

TRB 36 700 is a combined floor and room thermostat, and effect regulator for wall box mounting. COMFORT and ECO temperatures are set on the receiver (thermostat).

TXB 700 operates as a central room thermostat in a room with one or more Nobø C2/C4, T4, P4/P6, R3/R5 and Safir glass heaters. This thermostat controls up to 10 heaters in the room via radio signals. COMFORT and ECO temperatures are set on the receiver (thermostat).

 

TR36 is a combined floor and room thermostat for on wall mounting. COMFORT temperature is set on the receiver (thermostat). ECO temperature is set in the APP interface.

 

 

RSX 700 is a rail-mounted relay receiver for direct control of electric loads. Signals from Nobø HUB switches the loads on and off.

 

RS 700 is a flush mounted 10A receiver that switches the load on and off according to signals from Nobø HUB.

 

RCE 700 is a 10A control unit for power outlets, that switches the load on and off according to signals from Nobø HUB. Possible uses are lights and other appliances with a power cord, including heaters. COMFORT temperature is set on the heater.

 

TCU700 is a battery powered, wireless, room thermostat controlling NOBØ Safir Glass Heaters and NOBØ heaters with R80 TXF radio receiver. TCU700 communicates with the heaters through radio signals, and can be connected to Nobø HUB. COMFORT and ECO temperatures are set on the receiver (room thermostat).

 

Safir is a glass heater with an integrated radio receiver. Nobø HUB can control Safir via a room thermostat (TCU700 or TXB700). COMFORT and ECO temperatures are set on the room thermostat. As an alternative, Nobø HUB can control Safir directly if there is a Nobø Switch temperature sensor in the same zone. In this case, COMFORT and ECO temperatures are set in the APP interface.